Gunsmith to thread barrel

Post Reply
oldejoey
Posts: 4
Joined: Sun Jul 22, 2018 10:31 am

Gunsmith to thread barrel

Post by oldejoey »

Any recommended smith to thread a barrel
in Broward or Dade, now that Southeast Arms
is gone? Thanks!
User avatar
TACC
Posts: 461
Joined: Sat Sep 22, 2018 2:49 pm

Post by TACC »

I sent a couple of mine to TBAC.
Thunderbeast Arms, getting ready to send another one.

1 week turn around

They make suppressors, they know what they are doing.

https://thunderbeastarms.com/

Sent from my SM-G965U using Tapatalk

User avatar
rentprop1
Posts: 1043
Joined: Wed Jul 18, 2018 5:05 pm
Location: West Central FL
Contact:

Post by rentprop1 »

so what did they charge you ??
User avatar
TACC
Posts: 461
Joined: Sat Sep 22, 2018 2:49 pm

Post by TACC »

GUNSMITHING SERVICES

BARREL THREADING - $120

We'll thread your barrel to Class 3A thread specifications. Please refer to our thread spec print for details and barrel outside diameter limitations. The smallest recommended for calibers 6mm or larger is 9/16-24.
Please use the TBAC RMA form to initiate sending your barrel, barreled action, or rifle in.


From their website also, this is what they charged me.

Sent from my SM-G965U using Tapatalk

handlebar
Posts: 102
Joined: Wed Jul 18, 2018 4:19 pm
Location: Boca Raton

Post by handlebar »

Class 3 Machining-look them up on the internet.
Charge around $75
Wakko
Posts: 553
Joined: Thu Jul 19, 2018 7:11 pm
Location: South Florida

Post by Wakko »

I miss SEA. :(
User avatar
rentprop1
Posts: 1043
Joined: Wed Jul 18, 2018 5:05 pm
Location: West Central FL
Contact:

Post by rentprop1 »

handlebar wrote: Tue Jan 11, 2022 5:32 pm Class 3 Machining-look them up on the internet.
Charge around $75
Morgan Ritchie at Class 3 Machining is "the Best " guy in the country threading barrels right now, he's in Tx , you gotta send him your stuff pre-paid, its kinda like the soup nazi thing, contact him on Fb, IG, website or other social media, they are so busy they don't have time for your BS, you discuss what you want done, pay him, send your stuff and it comes back 100%....they do 150-200 barrels a week, this is all they do he has like 20 lathes running all day.
Wakko
Posts: 553
Joined: Thu Jul 19, 2018 7:11 pm
Location: South Florida

Post by Wakko »

They're able to do it with the receiver attached? I've got a Rem 700 and a Tikka T3 I'd like done.
Post Reply