Florida Shooters Network

Finally got the time and testicular fortitude to see if that STEN mutt would fire;







Needs a little polishing up, and a front sight but seems to feed/fire/eject properly.

Now to look into a barrel for being able to hotswap between 9mm and 7.62x25mm

Next project...maybe

Gonna start over with a new flat, HMG > Prexis

Looks like everything should line up nice

Starting to reweld the old pieces of scrap tube back together on the CZ-26 , Trying to think of a way to stuff some other kind of receiver/barreled action inside of it. The prices on semi-auto conversion stuff for these is astronomical.

NorincoKid wrote: ↑Thu Jun 27, 2019 9:36 am
Starting to reweld the old pieces of scrap tube back together on the CZ-26 , Trying to think of a way to stuff some other kind of receiver/barreled action inside of it. The prices on semi-auto conversion stuff for these is astronomical.

I have some reduced ID copper tubing that we used for the Sterling, it might work
.

rentprop1 wrote: ↑Thu Jun 27, 2019 11:37 amI have some reduced ID copper tubing that we used for the Sterling, it might work

I was going to hit up the auto parts stores and see what I could find for exhaust pipe close enough in OD to work. Looks like roughly 1.5" ,

I think I might try to find a Charter explorer pistol and run it inside the tube.




The Sterling has always intrigued me. I wish I had grabbed one of those Colefire (?) magnum pistols back in the day.

Original barrel, all matching AK74 bulgarian